Specifications
| Insulation Resistance |
5,000Min (at 25c') |
|
Temperature Range
|
-55c TO 125c
|
| Durablity |
500 CYCLE Connection/Dis - Connection |
| Contact size |
Current (A) Rating (Mated With Insulators) |
Contact Resistance |
Wire Range Accommodations |
| Size |
Pin Contact Dia. |
Solder Pot Dia. |
Test Voltage (DC) |
Potential Drop Max(mV) |
A.W.G |
Wire Nomal Square Size(mm ) |
Dielectric Material Outer Dia. |
| #20 |
1.0 |
1.1 |
7.5/ 7.5 |
7.5/ 7.5 |
55 |
#24 ~ #20 |
0.5 |
1.2~2.0 |
| #16 |
1.6 |
1.9 |
22.0/ 13.0 |
13.0/ 13.0 |
49 |
#22 ~ #16 |
1.3 |
1.7~3.3 |
| #12 |
2.4 |
3.0 |
/23.0 |
/20.0 |
42 |
#14 ~ #12 |
3.5 |
2.9~4.3 |
| Dielectric Withstanding Voltage |
|
Service Rating
|
Operating Voltage
|
Test voltage AC(rms), 60cps |
| AC |
DC |
SEA LEVEL |
50,000 (ft) |
70,000 (ft) |
| Ⅰ |
600 |
850 |
1,500 |
500 |
375 |
| Ⅱ |
1,000 |
1,275 |
2,300 |
750 |
500 |
Standard Materials and Finishes
| Shell |
alumium alloy, conductive
olive drab chromate over
cadmium or Zinc finish |
| Insulator |
polychloroprene rubber |
| Grommet and Seal |
polychloroprene rubber |
| Contacts |
Copper alloy, gold plate per MIL-G-45204type II |
Environmental Seal
Wired, mated connectors with the specified accessory attached, shall meet
the enviroments of MIL-C-26482
Durability
Minimum of 500 mating cycles
Shock and vibration requirements
When tested as above, the connector shall sustain no physical damage or electrical
discontinulty exceeding one microsecond.
|
Click to enlarge image 
Company